It’s the procedure of repairing a residence or property to its pre loss condition. Injury to the property could possibly be due to an overflow, flood or some other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. You can find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide could be the benchmark tool that is used by firms that specialize in restoration of water damage.
water damage restoration Des Moines, IA
Loss Assessment and Categorization
Loss evaluation is the first and the most crucial part of water damage restoration. The assessment has to be correct so that the appropriate response could be taken. In restorating the damage due to water, technicians and the insurance companies must work together and understand what is damaged and how exactly to start restoring the damage. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a proper water damage restoration. Categorization is on the basis of the contamination degrees of the water source. The categories are listed below
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This is water that’s some contaminants like water from the dishwasher, washer or toilet with urine.
Category 3 – This is water that is highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
After the evaluation is complete, the procedure of drying and decontaminating begins at the site. Based on the extent of damage, damage caused as a result of water could be classified into 4 types. Class 1 Damage- When loss is restricted to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage would be to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination has to be achieved if contamination has been detected in the area. Decontamination may be achieved for the whole area or in specific pockets where contamination has been detected.